TV accessories: mounts, VESA, cables and stands
Wall mounts, VESA patterns, screws, stands and cables. What has to match, where to read it on your TV, and which specs actually matter.
Start with the model number of your TV: every compatibility question below depends on it.
How to Find Your TV's VESA Pattern (Even If It's Non-Standard)
The VESA pattern is the rectangle of threaded holes on the back of your TV, measured in millimeters. Here is how to measure it correctly, where to look it up, and what to do when your TV doesn't follow the standard at all.
Reading time: 7 minwhat HDMI cable do I need for 4K 120Hz certifiedNo Such Thing as an HDMI 2.1 Cable: What 4K 120Hz Needs
HDMI version numbers describe specifications and devices, never cables. What you actually buy is a certification category, and certified cables carry a scannable label you can check before the money leaves your account.
Reading time: 8 minHDMI cable causing black screen flicker at 4K 120HzBlack Screen or Flicker at 120Hz: Is It Really the Cable?
A picture that works at 60Hz but collapses at 120Hz points somewhere very specific. This guide separates the four faults that get filed under "bad HDMI cable" and gives you the test that rules each one in or out.
Reading time: 8 minmounted TV is crooked or leaning forwardMounted TV Crooked or Leaning Forward: Cosmetic or Warning?
A TV that sits slightly crooked and a TV whose top edge is creeping away from the wall are not the same problem. One is geometry. The other is a load path giving way, and it does not fix itself.
Reading time: 7 minoptical vs HDMI ARC eARC for soundbarOptical vs HDMI ARC vs eARC: Decide by What Your TV Has
The right connection is the best one your TV and soundbar both physically have. Here's how to read the ports on the back of each, which link to use for every combination, and what to check when the sound or the formats do not arrive.
Reading time: 7 minreplacement TV stand legs or base lostLost Your TV's Legs or Stand? How to Find the Right Replacement
Replacement TV feet are not a generic accessory: they bolt into holes machined for one specific chassis. Start with the model code, then look for the official part, and consider a universal base only after you have measured.
Reading time: 7 minTV mount screws too short or won't go in spacersTV Mount Screws Too Short or Bottoming Out: Spacers and Limits
The TV is off the wall, the bracket is loose and the screw has stopped moving. There are only two mechanical explanations, and they need opposite fixes. This is how to tell which one you have before you force anything.
Reading time: 7 minTV wall mount weight capacity and anchors by wall typeWill Your Wall Hold the TV? Anchors by Wall Type
Whether a wall will hold a TV depends first on what it is made of. In most of the world that means brick, block or concrete with no timber stud to find, so the deciding question is whether the wall is solid or hollow. Here is how to tell, and what to anchor into once you know.
Reading time: 8 minwhat screws do I need for a VESA TV wall mountVESA Screws M4, M6, M8: How to Get the Size and Length Right
The right VESA screw for your TV comes from its manual or from a quick measurement, not from a size chart. This guide shows where to find the thread size, why charts by hole pattern and by screen size disagree, and how to work out a safe length step by step.
Reading time: 8 min